Live alone install drywall is one of the more instant jobs that can be like a homeowner. Do you have a ceiling that has been damaged by a leaky roof or a cooling pan, or most of the new part of the renovation, at some point, you need to work on drywall in your home. The great is; with the right knowledge, the right equipment, and some applications; Contact all the people he can do. About the basic requirements
This material can be clearly seen, but it has most different options
Thickness – Drywall or thick sheetrock, This very common housing is more commonly used in commercial work and building code requirements in many fields because of its higher fire resistance rating. is more used over other materials such as panels or plaster when various types of surface cubicles are desired. If you make a revision through revision; check the thickness of the existing drywall when buying new materials. You make it right if it’s appropriate.
Application- request the room and ceiling to get a standard gray sheet. However, in a zone with large humidity, a kind of bathroom with a kitchen; use a green stone that is more waterproof. There is also, at present, drywall which contains the same type of cement fiber material used in tile support boards for use in cubicles that need to be ended by making.
Joint Compound- Placed also by sheetrock mud, this is a key element for the successful installation of drywall itself. This suddenly arrives in a paste containing form in a box or in a bucket, in a bag, which must be filled with air. There is also a dry flash quack material that can be used for revision and revision.
Joint Record- This can be purchased in the form of traditional paper, which must be applied with a composite composition on tape, which is commonly used in revisions because it eliminates a process step.
Nails or Screws – Traditionally, nails have been used in residential work as well as screws in commercial (because of the use of metal studs. However, screws have become more in housing due to the speed of screw guns.
Equipment – Only some basic equipment wants to handle most types of self-installation of drywall
Drywall Knives – This type of knife is not used for cutting, but for spreading mud, gluing seams, and floating and skimming; and, actually equaling a spatula more than a knife. They arrive in various widths from close to 3 “(used for taping stitches) to 12” (for floating and skimming). You might want to need at least 3 dimensions for any job, because each skim coat is a little wider.
Mud Pan- This rectangular pan is either metal or plastic and is used for holding joint compounds. They are quite small to hold with one hand, when using a knife with the other hand.
Utility Knife / Sheetrock Saw- Most of the cutting of sheetrock is now tried with a utility knife with an interchangeable knife. Change as often as needed for clean, easy cuts. The Sheetrock saw is a long triangle saw (near 10 “) with a small handle and is mostly used for cutting holes for plumbing and electricity.
High Powered Drill & amp; amp; Paddle Bit- If you do a small revision; You can combine mud with your hands with a drywall knife. But for the larger ones to carry out their own drywall installation project, it means that you have a fairly sturdy drill to combine mud with oars for proper consistency and to remove bulges.
Hanging- This is pretty clear. Nail or screw it to the cubicle or ceiling. Only part of the guide.
Secure it well- Don’t skimp on nails or screws. You don’t want to move when someone leans into a cubicle. The aground tightens properly to cause cracks in the mud.
Watch For Cutouts- Keep an eye on switches, plugs and telephone jacks. They are easily covered up and difficult to find later.
Have Enough Encouragement – Sheetrock is heavy. Make sure you have someone to help you hold it when you get a screw or nail. This is especially true when hanging from a ceiling.
Countersink the Fasteners- Make sure the nails or screws penetrate outside the surface so they can be covered with mud.
Finishing – The process of completing the taped and floating drywall and that is a very meaningful step for carrying out the drywall installation itself.
The Stitching Tape – This can be tried with paper or fiber tape. With paper, spread the thin arrangement of mud on the seams, using a drywall knife; press the tape into the mud and on the seams. After that, use a knife to eliminate excess mud. When this process ends; You must wait for the mud to dry up before applying the initial skim coat. The advantages of fiber tape are; it sticks to sheetrock without the need for mud. So, you can immediately apply the skim coat.
Float and Skim- This can be tried in a coat or it may need 2 or 3. The idea is to have a flat surface without rising, bumps, and dips. One key to the success of installing drywall itself is combining mud with the right consistency so that it is easy to spread. Others are just good old-fashioned applications. Some people do it faster than others. But, continue to be a lot of you do it, continue to be your good.